Kenneth Industrial Products, Inc.
35 Winsome Drive    P.O. Box 430
Durham, CT 06422 USA
80
0.322.3306        860.349.7454
Fax: 860.349.7977

Claremont Sales Corporation

Thermal and Acoustical Insulation

claremontcorporation.com

Metallic Gaskets

Flexitallic Spiral Wound Gaskets

Style CG – Utilizes an external ring which accurately centers gasket on flange face: provides additional radial strength to prevent gasket blowout and acts as a compression stop. A general purpose gasket suitable for use with flat face and raised face flanges.

Style CG Data Sheet

Style CGI – Suitable for use with flat face and raised face flanges and specified for high pressure/temperature service or where corrosive or toxic media are present.

Style CGI Data Sheet

Style R – Basic construction, inner and outer diameters are reinforced with several piles of metal without filler to give greater stability and better compression characteristics. Suitable for tongue and groove or male and female or grooved to flat face assemblies.

Style R Data Sheet

Style RIR – Solid inner metal ring acts as a compression stop and fills the annular space between flange bore and the inside diameter. Designed to prevent accumulation of solids, reduce turbulent flow of process fluids and minimize erosion of flange faces. Suitable for male and female pipe flanges.

Style RIR Data Sheet

Flexitallic Spiral Wound Gaskets Brochure

Flexitallic Style M, MC and MCS

These styles are designed for boiler manhole cover assemblies. They are usually round, obround, or oval shape, depending upon the manhole plate configuration.

Kammprofile Gaskets

The serrated solid metal core concentrates bolt load on a small area for a tight seal at lower stress while solid the metal core resists cold flow, over compression and blowout. The rigid core provides exceptional stability, even in large sizes, and facilitates easy handling and installation.

Heat Exchanger Gaskets

Kenneth Industrial supplies a wide variety of heat exchanger gaskets. Among the most requested styles are double-jacketed gaskets, Kammprofile, corrugated gaskets, and solid gaskets, all available in a choice of metals and filler materials.